2018-01-17 Lake Okeechobee Crossing

We had a terrific time in Stuart but it was time to get our girl Magnolia underway and see how she does out in the wild. Our plan was to cross Florida via the Lake Okeechobee. 

Lake

The Admiral does a great job at putting together a list of “events” we need to get through the following day. Things like bridge opening, locks and shallow spots.  

20180107_132855

The Pilothouse setup and ready to go, just need to pull the sunscreen.

20180108_081258

Finally, we are off as pictured by M/V Amici

20180108_110301

We hardly got going when we saw these to Bald Eagles looking for something to pick up for dinner.

20180108_112318

We entered our first lock and the doors are closed behind us.

20180108_095754

Our first nights stop was at Indiantown Marina when this guy came by looking for a snack to come his way. We were glad we were not it!

20180108_170611

As we began our transit across the lake we could see the smoke from what we believe was a sugar field burn off.

20180109_100630

Our second night was spent in Clewston, FL. I watched for sometime as these two faced off on who owns the roof!

20180109_141158

Our next night was planned to spend at anchor in the type of place we enjoy the most. We have a reputation of being “adventuresome” anchorers. We like to get off the beaten path for a night of quiet and solitude. Lolipop sounded right up our alley. As we approached the entrance it slowly revealed itself.

20180110_134149

The channel was not wide enough to turn around so we were committed.

20180110_134221

As we had hoped, we were rewarded with a surrounding cattle pasture.

20180110_144744

It was really funny about how the cows just stared as us as were were getting the anchor down…

20180110_144815

Speaking of, there was a small toast towards our anchor Vulcan on her first time down and taking responsibility for the vessels safety.

20180111_080532

20180110_160819

Screenshot_20180110-142624

The final day of our crossing ended in Glover Bight at Cape Coral FL. A well protected anchorage with some lovely views is always very welcome.

20180111_181253

20180111_172641

We stayed and extra day to relax and enjoy a fine lunch ashore at Rumrunners!

20180112_104551

Off to Charlotte Harbor tomorrow!

2018-01-09 “Yes its next year…”

I keep wondering when things will slow down, not that anything is bad or anything, just that time flies by so fast!!! We finally got out of the boat yard once and for all…well at-least for now. December was spent getting use to our new home and most importantly reconnecting with family and friends…well yes there were a few boat chores tossed in there. Might as well as start there…yes, there is always a bilge pump switch needing to be swapped out. The bilges on this boat have not been cared for all that well so there is much more cleaning to get done….its an ongoing project.

20171210_123954

The saloon lighting also received an upgrade with some recessed light along the outer edges. We did something similar on the sail boat and were very happy with the outcome.

20171211_173107

The mooring field is part of Sunset Bay so you can obviously see where the name comes from.  I still think Tucson, AZ is the best place for sunsets, but this is a close second.

20171211_173653

Annette made a backing for the solar panel and it was my job to set the grommets. Sure glad we have this semi sledge hammer made for the job!

20171215_132441

We were able to meet up with my old Ticonderoga shipmate Mike for a pre-Christmas libation. He relocated to the Stuart are and it has been great reconnecting!

20171215_211550

Our friend Mimz returned to Florida from her cooler home….cannot believe she did not stay in the summer like we did. She did seem to enjoy her visit aboard. I am thinking she is a stow-away risk, a welcome one that is for sure.

20171217_133209

Annette’s sister Rochelle and Robins came for a vacation to FL and we were able to steal a little of there away time to spend with us. It was a terrific afternoon and fun evening.

20171221_190848

As we crept closer to the holiday season the weather crept closer to unacceptable. We had several days of down right cold temperatures! That fog is not from warm air…just say’n.

20171222_083413

Annette and i managed a 48 hour trip to DC for Christmas eve and Christmas day. We enjoyed an evening with my cousins and catching up with the other GenIV’s

20171224_184117

20171225_065743

One surprise was the popularity of the Magnolia-M cap during the white elephant exchange. That cap changed hands several time!

20171225_071657

Back in Stuart, FL we celebrated a birthday on New Years eve. It was a fun time with Pegasus, Amici, Exuberant and Magnolia all together once again!

20171231_195121

Under that category of it takes a village…this 88lb Rocna Vulcan beast required the whole village to get aboard. My friend Burt helped me get the old CQR off the bow and delivered ashore. Out mutual friend Mary drove us uptown for the pickup and we got in the dink just before the weather really kicked up. We left is rest in the dink for a day till the wind laid down and Annette and I got her mounted on the bow. This monster is going to be making for some good sleep! ….btw, yes there are some “real” shackles on the way!

20180104_141023

We wrapped the holidays with Amici arriving in Stuart and much food and drink ensued. We managed time aboard and ashore!

20180104_183655

20180107_144403

20180107_144428

Exuberant and Amici beyond!

20180106_173910

Next post….we are FINALLY outta here!!!!

Lake

Until then, be safe! A**2

2017-12-16–Inexpensive Rearview Camera

The one obvious difference between Magnolia-S and –M was you when we looked behind the sailboat you could see you behind you…not so much. I did some looking and found out I could actually get a camera and monitor a lot cheaper than I expected. The system I put together started with a camera (https://www.amazon.com/gp/product/B01EJ09X8G/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1)

image

The video signal runs through a cable with a BNC connector so it was important to have a monitor with a BNC input. (https://www.amazon.com/gp/product/B01KJVERF8/ref=oh_aui_detailpage_o03_s01?ie=UTF8&psc=1)

image

Additionally I purchased a cable which is a combination video and power cable. (https://www.amazon.com/gp/product/B00H274A6Y/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1)

image

I also purchased connectors for the power cable but I also will use these on an LED lighting project as well. (https://www.amazon.com/gp/product/B00VESYK0S/ref=oh_aui_detailpage_o07_s01?ie=UTF8&psc=1)

image

Last but not least was a mount for the camera so I could attach it to the bimini support. (https://www.amazon.com/gp/product/B01DGLC2AK/ref=oh_aui_search_detailpage?ie=UTF8&psc=1)  I found as I was writing this item is no longer available from Amazon.

image

I first identified a circuit breaker to provide 12volt power to the camera and the video monitor. I cut the 120v to 12v power supply off the video monitor power cable and spliced the remaining connector into the 12v line. In addition I used Maxmoral connector to neatly get power the video camera as well. Connecting the video cable to the Camera and monitor I powered the system up for a test run.

20171205_144357

I really was surprised how good the picture was. After initial testing the cable was run through a standard Krogen cable run. Up through the column between starboard and center window.

20171218_102143

Aft along the port side in the cable run above the curtain

20171218_102133

and finally up to the fly bridge.

20171218_102122

Once up to the fly bridge that run is till being finalized. I also need to make a starboard interface between the mount and the camera.

20171216_155437

So how does it work, really amazing for about $100! Even the the low-light condition the picture is pretty amazing!

20171215_182626

If you have questions feel free to reach out and will gladly help if I can!

2017-12-13 What a Month, But Magnolia IS in the “wild”

The Admiral and I always do what we can to be in Vero Beach, FL for the Cruisers Thanksgiving Potluck. It is a great time to catch up with all the cruisers before people head off to the Bahamas or the Florida Keys. Though Magnolia was ready to go, we were chicken to take her rather than a rental car. The mooring field can be crowded and we certainly did not want our first trip out to end with a dented fender….I already did that but I was 16 and….I digress.  In the end we took the rental car and had a great time catching up with many of our friends.

 20171123_135205

Friday though we were up early and ready to get Magnolia underway headed to an anchorage in Stuart.

20171122_132258

We had a wonderful cruise down the St Lucie river to Stuart….when we arrived and set the anchor though…we found the forward bilge full of hydraulic oil. Not good, not the end of the world but not good.

20171124_144950

The leak was coming from the the anchor windlass hydraulic plumbing.  The leak was luckily contained in a void behind a bulkhead.  We were actually lucky about the leak location. Hot hydraulic fluid leaking at 1900 PSI is really nothing to take lightly. 

20171127_081908

Annette and I pulled out the old stainless plumbing and Industrial Hose & Hydraulics came out and made replacement hoses for us. Again Annette and I installed the replacements. Here I am actually inside the chain locker….it is HUGE! We were soon ready to head out!

20171128_123530

Our friends on on Pegasus and Exuberant drove up to the boat yard to help us with out disappointment in our equipment failure…their visit made for a delightful evening.

20171126_174030

The “Reverend Of Sole” our friend Ray got a picture of our departure.

 output

This was our view as we got underway. I need to point out that the Admiral docked us in that spot with no bow thruster when we returned to the dock. This was her first ever docking of Magnolia-M

20171124_085313

This is the house we rented while work on Magnolia was being completed….just down the creek from the boat yard.

20171124_085655

Our friend Jenifer caught a picture of us as we passed coming down the creek.

20171130_090930

Obviously the Admiral is happy to have her vessel underway.

20171124_202743

20171124_094335

It was glorious day to be on the hook in Stuart…

20171130_192727

I too am obviously happy to be back on the hook.

20171130_161736

We were not done with our work though, there is much work to finish. I installed additional lighting in the saloon

20171211_173107

Then there was also the faulty bilge float switch that needed to be replaced.

20171210_123954

In addition Annette made a backing for the additional solar panels to be mounted

20171207_104518

I installed a rear facing camera so we can who is trying to sneak up on us as we are moving on inland waters.

20171205_144357

Life is definitely getting back to normal, Sunday morning screw and bolt sorting…

20171203_085049

The new Blossom is ready to ferry us on our daily errands.

20171130_170220

..and of course we had to go through our first thunderstorm with wind over 30knots..

20171209_074058

The on the other hand, this is our backyard

20171211_173653

and this is our home…

20171122_131212

20171122_131220

20171122_131225

20171122_130359

20171122_130345

20171119_175717

20171122_130239

20171119_082046

20171031_191428

We have worked really hard for this opportunity are very excited to share it. If you would like to visit, please let us know and we will see what we can work in the schedule. As far as schedule…we are here in Stuart FL till the new year when we will be heading across Lake Okeechobee to visit the west coast of Florida! Please enjoy the blog and let us know about that visit!

2017-11-08 Varnish & “The Reverend of Sole”

“SOLE – Cabin or saloon floor.” One thing I always wanted to do on Magnolia-S was have the cabin sole refinished. It was one of the tasks on the must do list for Magnolia-M . The pilothouse is real Teak and Holly. Many boats have Teak & Holly veneer on plywood so I was completely surprised to find that our sole was solid boards instead. Learning that was all the more reason to restore the best we could. In regards to tools see the single edge scrapers to the left. The Reverend used those and a heat gun to quickly removed the existing varnish.

20171020_085146

20171020_085204

Ray, also known as the Reverend Of Sole has done A LOT of work on Magnolia. He is leading the way and lets me come and get in the way. I help where and I can and really excel at step-n-fetch.

20171020_093451

Using the heat gun and scraper got down to the raw Teak and Holly.

20171024_084554

The raw wood was power sanded with increasing finer paper to 220 grit.

20171024_113501

The Reverend used the AwlGrip products on the sole.

20171026_084430

The first coat application was absorbed like a sponge.

20171025_155638

The Reverend used a taped 3 inch chip brush to cut the edges and then a 6 inch foam roller for application.

20171026_082301

20171026_084436

If the Reverend did not step on the sole he was able to apply 2 coats per workday.

20171026_144534

This was application of coat number 4.

20171026_144547

In the end we applied 7 coats in the Pilothouse.

20171026_151040

The rest of the sole is teak parquet . The Reverend tapes the edge to protect the teak as he is sanding.

20171025_103522

The plan was to give the below decks sole a good sanding and not go to the time and expense of fully stripping the sole.

20171025_155642

After three coats of varnish and hardware re-installed they look terrific! We will be putting down some rugs and the gloss finish will make the edges really pop!

20171028_090340

If all goes to plan we will be moving aboard next week. We are very excited to say the least.

2017-10-29 — Haul, Bottom & Stabilizers –Week #16

All the work done thus far was to get us here, to get hauled and the stabilizers serviced. Magnolia in the straps getting the “big chunks” removed.

101617074095HDR

Finally blocked and ready for a busy (very) week!

20171018_123234

Pablo got right to work getting the bottom prepped for paint.

20171019_094119

The biggest unknown of this whole refit was the condition of the stabilizer system. Stabilizers are very common on big cruise ships and mega yachts. . The system responds to movement in the vessel and counteracts any wave induced rolling motion. Generally it makes for a very comfortable ride in most all sea conditions. Magnolia is equipped with an older system built by SeaRocq/Koopnautic, which was purchased by Naiad. Though all the mechanical/hydraulics are supported, if the computer fails (monster pictured below) well thats gonna hurt. Will cross that bridge if we get there!

20170831_085757

Mean while, the bottom actually looked pretty decent after sitting around for the last few years.

20171019_094043

The corner of the trailing edge on the starboard side had taken a chip at one time or another. That is a VERY minor repair.

20171019_094133

Since this system had been “under-maintained” for so long we brought in the Naiad Factory guys to do the work.

20171019_143610

The best news we heard was “wow, everything looks really terrific.” This is the hydraulic actuator mounted on the interior hull and rotates the fin as commanded.

20171019_132831

The fin/shaft assembly dropped out of the actuator assembly. The shaft looked terrific with no wear marks anywhere.

20171019_143540

It may not look it but the Teflon coated sheath was perfect with no wear at all. We decided not to replace and hold the new ones as onboard spares.

20171019_143547

Everything went better than we could have imagined, so happy to have that maintenance behind us. On the upside, the maintenance cycle on this system is 3-5 years as opposed to the Naiad every two years!

20171021_102234

While we were out of the water we replaced two transducers so we would have a port and starboard depth finder. That will help keep us in the middle of the channel!

20171020_085604

While the yard was working on the bottom I took the opportunity to varnish the deck plate that will go into the laundry “room.” Yes, its small but there really is one!

20171021_081944

20171021_083922

20171023_125136

20171023_125151

The whole team did a terrific job. Magnolia went from drip to splash in a short 7 days. There was a TON of work accomplished…it was a good week!

2017-10-22 — Nearing Completion–Week #15

Yes Yes I know….no we have not thrown in the towel and walked away..its just that the last 3 weeks have REALLY moved us down the field and closer to getting out of here! First on deck, or more accurately on the FlyBridge is the Bimini cover that Annette made. When the is not up we need to keep it get shredded in a strong wind. The cover came out terrific!

20171011_153539

Part of our refit plan included new electronics. I installed an updated chart-plotter, new instruments, wind, radar, AIS Transponder and two depth transducers. One on each side of the keel so we know which way the deep water is. The unfortunate part is the old equipment was physically  larger than the new so I needed to make these large black Lexan plates to mount equipment in.

20171004_091108

I was able to verify the AIS was functional by seeing Magnolia on Marine Traffic meaning our transponder was functioning.

Screenshot_20171004-142452

Between the King Tides and the fact that Lake Okeechobee is dumping as much water as possible because of the high water. This caused water to completely overtake the docks and flood the parking lot.

Resized_20171005_115742

Ray was forced to deploy his “No Wake” sign to limit a car wake from being enveloping his shop!

20171004_101207

As you see we have finally received out Power Take-Off coupler that connects the engine to the hydraulic pump.

20171005_082426

We were so happy to see out mechanic Jon get it installed and the pump functioning again.

20171005_082442

As soon as we got the hydraulics functioning Jon got the rest of the engine room closed up. 

20171012_075151

Shortly after that the Admiral (Annette) FINALLY got us off the dock! She did let me drive a little…in the straight wide part of the river that is! Thankfully all the systems check out with the exception of a small leak around the exhaust manifold…need a gasket replaced…..argh. It did set us ready for haulout..more on that in a moment.

20171012_094226

We also received our Magnolia SWAG, available in the Ships Store on the 4th deck….Smile 

20171012_170716

Taking to my domestic side…I did get a faucet installed in the galley!!!

20171013_110847

We also replaced the center pilothouse window. The windows in the pilothouse are 3/8 in safety glass. Boat wise that is some heavy stuff!

20171013_131951

Our mini sea trial was on Thursday and our friends from Kindred Spirit (Al & Michele) were arriving on Saturday.  We implored the yard to delay the haul till Monday so we could complete the sacred vessel renaming ceremony. We tried to settle the boat the best we could to have guests aboard. Pilothouse Settee

20171014_131857

When Al & Michele arrived we actually had a little time to hang out.

DSC04846

We used the same script that we used for the renaming of Magnolia-S. We certainly believe completing the ceremony ensured the protection from Aeolus & Poseidon during our 4 years aboard our sailboat Magnolia. The ceremony starts with requesting the current vessel name be struck from the “records and archives.”

1015171526c

This is traditionally accomplished via an engraved ingot delivered to the sea floor.

DSC04859

In our case a piece of aluminum with the name had to suffice.

DSC04861

DSC04848

“In consequence whereof, and in good faith, we seal this pact with a libation offered according to the hallowed ritual of the sea.”

DSC04865

Below is a description of the Black Black Box Theory by John Vigor:

 The Disease Called Cruising
9. Points in the Black Box

ON EVERY boat there’s a little black box. You can’t see it, but it’s there all the same. It’s full of points that help you get out of trouble. At least, it should be full of points.

Every time you do something seamanlike, a point goes into the black box. Every time you whip a rope-end instead of leaving it to flap itself to fluff in the breeze, you earn a point. Every time you study the chart before entering a strange port; every time you climb the mast to check the topmast fittings; every time you remember to use the bilge blower before you start the motor, the points pile up in the black box.

At sea, the system starts to work two ways. Firstly, you can continue to stuff points into the box (it accepts an infinite number) by taking seamanlike actions — say, by reefing the mainsail after you hear a gale warning on the weather forecast, or by putting on your safety harness every time you come on watch. Secondly, you can start to draw on your account.

In all small-boat voyaging there is an element of risk that cannot be eliminated. Indeed, it is the lure of danger (and overcoming it) that attracts many to the sport. Inevitably, therefore, there will be times when the ship and her crew are in danger to some degree, despite all the precautions you might take.

This is when the points start expending themselves. You have no control over when and where they’re spent. Butthey know when they’re needed. When horror is rife, when the mast is crashing down around your ears, those chips come rushing out of the black box to fight on your behalf.

But they have to be available. You must have earned them in the first place.

That’s why some boats and some sailors survive gales and capsizes when others don’t. Some boats will go aground on the only rock for miles around. Others will happily blunder through a maze of reefs.

Some people have a name for it, a four-letter word ending with u-c-k. But on our boat we don’t believe in l-*-*-* and we never pin our hopes on it. We try, instead, to earn points for our black box. We know that if misfortune catches us with an empty box we’re in trouble. Fate allows no overdrafts.

So there’s really no need to wonder why some people and some boats seem to be treated by Fate more kindly than others. It all depends on how much you’ve got in your black box.

Incidentally, you can never tell exactly how much credit you’ve earned, so you can never relax completely. If you examine your conscience you will have a fair idea of how full your black box is, but to be sure of having enough points you must keep learning the ways of the sea, and the way of a ship in the sea. And you must keep putting your knowledge to practice.

In other words: Look after your ship, and she’ll look after you.

Our friends Kurt & Debbie sent us some some small tokens to carry aboard Magnolia-s and “seed” our box aboard. In addition our friend Al & Michele made us a small black box along which also contained valuables to carry to sea with us. Between these two presents we committed to taking care of Magnolia and she we.

DSC04878

Conclusion of the ceremony.

DSC04882

DSC04886

A wonderful time had by all. In addition Mike Camacho who served and commissioned Ticonderoga with was able to attend the after party.

DSC04890

Though the galley was not ready for full service, we did manage to rummage up some snacks!!!

DSC04893

There was of course after snack ice cream!

20171015_193025

Magnolia was hauled Monday morning at 7:30 am ready to spend some time on the hard.

101617074095HDR

A good bottom clean and some hull wax went a long way toward brightening her up!

20171018_123234

20171019_100028

The Naiad Team came up from Fort Lauderdale and quickly disassembled the stabilizers.

20171019_132831

This one job was the most stressful thing we have had done on Magnolia since we have been here. The stabilizer system was the ships system we knew and understood the least. It is also one of the most expensive so we were truly ecstatic to find system internals to be in such good shape. A major major bullet was dodged.

20171019_143553

20171019_143610

It was definitely a sun came out kinda day!

20171019_155203

I have also been helping the landlord from our rental house with some chores. In the second bedroom which quite small she wanted the back of the headboard face with knotty pine to blend in with the existing walls.

20171019_171515

It took a little bit to figure it out but the completed project which contains 6, yes 6 wired brads came out quite nice.

20171019_171550

Back aboard, Ray started stripping the pilothouse sole. The pilothouse is the only place where there is Teak and Holly. The varnish had broken down in several places so a complete strip down. The rest of the cabin sole is parquet and will receive light sanding and varnish. This will be a barefoot boat inside!

20171020_085204

One of the depth transducer mounts cleaned up and ready.

20171020_085604

I caught Ray on a rainy day dressed to the nines….how does he keep the ladies at bay! Seriously he has worked very hard, taught us a lot and helped make our vision a reality.

20171020_093451

Meanwhile back at the rental house I have varnish on the laundry room deck plate.

20171021_081944

Our girl fully dressed and ready to splash…hopefully Monday morning (tomorrow).

20171021_083922

20171021_102234

2017-10-01—Gaining Steam–Week 12

We had a very good week aboard Magnolia. We are starting to get some real momentum behind our efforts.

20170924_124756

Early in the week the interior cushions came back from upholstery. The three of us, remember our designer (arbiter) Robbin selected a creame Ultra leather for the Saloon..yes its really called the Saloon.

20170926_114755(0)

We used a small pattern Sunbrella material on the Pilothouse Settee. We used the same material on the Sewing Room Settee.

20170927_173514

Staying with fabrics look what the Admiral made! It our big fish shower curtain!

20170926_140143

Back to the technical, got our new run cables labeled and catalogued. Hopefully sooner than later the cable run access places will go back on and either us or some future owner will now where and how things are wired.

20170928_113712

In addition our radar arrived. We selected the Raymarine Quantum Chirp. Cannot believe how much things change. All you really need is to add power! It is connected to the network via WIFI. Now being old school I ordered the optional data cable. We will experiment with the WIFI capability.

20170928_144813

I also got the the television antenna modified  and dry fit. On the Morgan have the antenna below the top of the mast caused for some blind reception spots. I am hopeful that getting it above mast top will eliminate that problem. In addition you can see we have the new VHF & AIS antennas but waiting on new mounts as well as LED masthead light.

20170928_144116

It seems old electronics are larger in physical size so as we are updating those need to hide and over over some holes. Since completely refinishing the helm was outa scope a simple solution of Plexiglas over lays should get us by. A little harsh but will have to work.

20170929_110257

Just one more time I am grateful to my Jack Tennar multi-tool. You will have to wait till next week for installation.

20170929_120845

While the Admiral was turning out labels she made new ones to replace the hand written white tapes.

20170929_105328

Friday ended with getting the radar mounted on the mast….

20170930_154527

which made it time for a perfect happy hour on board with our 34 degree ice cold beer!

20170929_164424

But since we don’t weekends off, I started looking into the last mile wiring for the electronics…well as you can see I got some work to do in the name of cleanup….

20171001_114025

Every blog needs a food picture and this is actually how we ended out week, Sunday Dinner via the Admiral…nice work

20171001_174128

Looking forward to the progress this week….stay tuned

2017-09-24—Off and Running–Week 11

Before we get to work, the view from the office really is not so bad. Every morning I try and take a moment to enjoy the surroundings. I have been a little disappointed that have not seen the alligator again.

20170920_082430

As I started the week with installing the antenna for the Single Sideband antenna I discovered a couple mounting holes needing to be filled. A little Marine Tex to fill followed by a little sanding. While I was sanding I decided no time like the present to knock another thing off the list and that was getting ready to paint over the green with blue…thats another day though.

20170919_104307

The antenna went in fine and the radio is working perfectly! In other news…I walked past the sewing room the other day. The canvas guys had taken Annette’s stool out with the rest of the cushions for re-covering. This is what I found in the sewing room. A true Seamless Sailor does not let a lack of stool slow her down!

20170920_095636

The big goal for the week was get the cabinetry work done around the refrigerator and have that installed. The surround and the door panels were cut from a single piece of veneer.

20170921_114343

Our carpenter Ray did a terrific job. He executed out vision perfectly!!!

20170922_082255

We are really happy with the outcome. It definitely brightened the galley!

20170922_081821

It really cooled right down too! Now for the geeks among us…The fridge we selected was the Nova Kool RFU9000. It runs on 120VAC or 12VDC drawing just 5.2 amps. We have both modes wired and will use DC when we are on the hook and way from the dock.

20170922_120539

In addition Magnolia received her first thorough bath this weekend.  We have not made time to giver her a good scrubbing so it was about time. She is going to need at least two more before she up to snuff!

20170922_094822

We also removed the old name and are working on the lettering for the new name. We are looking to use similar lettering as was on sailing Magnolia. 

20170922_122158

Giving her one last rinse before calling it a day

20170924_124732

Up this week is getting a real start on the electronics installation.

2017-09-17 – Footing Regained — Week #10

Its hard to believe it was only a week ago that Irma was in town visiting us…actually we left town and she followed us up the western side of the state. Even with the Irma on the other side of the state our friend Ray at the yard sent me this as the water started to come up…as you can see water is just over the docks at this point and went up another couple of feet after.

0910171801

We can not express enough the appreciation to our friends Ty & Suzanne for taking us in on short notice. Their kind hospitality sure did a lot to relieve some of the anxiety of where to go and what to do! Besides, the view looking out at the Oaks and Spanish Moss over my morning coffee was not too tough to take!

20170913_164656

By midweek the though it was time to get on back to Stuart and thankfully the power was restored at the same time. This is the view of Magnolia upon our arrival. We went right to work moving the extra boxes back to the rental house and getting Magnolia resettled.

0913171245

The house we are renting is a cute little place about 500 yards down the creek from the boatyard. Its right on the water. It really is a lovely location.

20170916_172235

View from the porch towards creek

20170916_173542

Looking up the creek to the boatyard Magnolia is moored right behind the boat photo bombing the picture!

20170916_172155

My grill area needs a little post Irma clean up but it will do nicely

20170916_173536

A Capitol Grill Steak knife can only mean one thing for dinner!!! We gong to be easy to be here so if you have a day or two, think about trip down. We already have our first guests coming next month and very excited!!!

20170916_175609

Even with a short week a few things got done. The Refrigerator below was dry fit with the new cabinet. I also got the galley exhaust fan installed along with some only hardware removed from the top side decks and the holes filled. Have some big goals for the coming week! Oh, yes, we did get some bad news in the Main Engine PTO Coupler we were having made was delayed and now the delivery date for that is delayed 30 days. That hurts but there is mush to get done!

20170917_192912

Have a great week! Be Safe! PS Thank you again Ty & Suzanne