Category Archives: Exterior Projects

Sport-A-Seat Covers–Save Your Seat

Extending the life of pricey cockpit seats can save you money.  These Sport-a-Seats aren’t cheap, but they are worth it for your comfort on a voyage.  There isn’t a lot of sewing in this seat cover project, but there is plenty of planning. This is a good beginner project. The idea for this project came from Good Old Boat magazine which had an article entitled “Protection in Plaid” by Don Casey (March/April 2014 issue, page 46).  If you don’t have the magazine or don’t subscribe, you can buy a back copy for $8. (It’s not appropriate to reprint the article since it is their copy-written content.)  It’s worth the price for this project as he has very good details and graphics showing the design layout. I had ideas Read more [...]

A Junior Seamless Sailor Sews a BBQ Cover

During a recent wind storm, the Captain woke to say he left the canvas barbeque cover out on the aft deck after barbequing our favorite rosemary pork loin. Cover presumed gone. Oops.  New BBQ cover needed.  He suggested that it sounded like an opportunity for him to learn how to sew.  Since we were laid up for a day or so at anchor till the blustery 25 knot winds passed, it seemed like as good a time as any to have a teachable moment.  Fortunately we stock a few yards of Sunbrella on board and at the ready. The Captain came up with the measurements and plan. A round base with sides and a casing at the top.  Nothing fancy. The design was presented at Preliminary Design Review (PDR) and Critical Design Review (CDR) level reviews* and ultimately Read more [...]

Boat Enclosures–Extend the Life of Your Outdoor Room

The Seven Seas Cruising Association (SSCA) 2014 Gam has come and gone.  It marked the end of our first year of cruising on Magnolia full time.  This was our fourth SSCA gathering at Camp Letts on the Rhode River in Maryland.  We love the Rhode River so this gathering feels like home for us.  Good folks and good information sharing.  Some new info, some info that confirms my understanding of different things and some that I already knew (that experience itself is new as I used to feel that I knew zip!) This year there was a session on caring for boat enclosures.  Our enclosed cockpit is our outdoor “great room” where we spend a good bit of our time. I previously wrote about it here.  There were two speakers during this session.  Read more [...]

Flexible Solar Panels – You Light Up My Life – Part II

  Update October 2014:  We did find some rubbing on the Sunbrella canvas top at the bows of the enclosure.  That wasn't going to work for us.  The enclosure is relatively new so we didn't want to add any unnecessary wear.  The Captain came up with a new installation still using the canvas backings.  Aluminum poles with line and snap shackles at each end are inserted into the canvas side casings.  The panels are taken up to the bow of the boat and attached to the lifelines.  Now the panels have even better sun and we get the benefit of some shade for the v berth! While we have a solid  8.5 kw Westerbeke generator aboard Magnolia, after our first year of cruising we decided that it would be an improvement not to have to run Read more [...]

Stand Up Paddle Board Cover

Seamless Sailor is pleased to present a guest post by Carolyn Shearlock of The Boat Galley and co-author of The Boat Galley Cookbook.   Carolyn and her husband, Dave, recently bought a catamaran, Barefoot Girl.  In her travels she takes her iSUP stand up paddle board with her.  In true Seamless Sailor style she jumped in to solve the problem of how to store and transport the board in a workable cover.  With some creativity and sewing know how she tackled this cover.  Love the solution and so will you if you have a SUP!  Thanks, Carolyn. I got a request for how I made the bag to take my Tower Xplorer SUP on a plane. The board is just barely inside the limits for not having to pay oversize fees on most airlines, so a bag that Read more [...]

You Can Make an Easy Hatch Cover

Hatch covers add a nice protective layer to your expensive overhead hatches.  They keep out sun or star light and might even help a bit deterring a little leak.  Lexan polycarbonate windows are expensive and can be damaged if not cared for.  A cover is a good way to help preserve these windows.  Unfortunately,  we seem to lose one or two covers a season to a bad storm or rotting shock cord.  You can make an easy hatch cover in just a few hours.   I remade an old hatch cover previously and wrote about how I did it and resources I used here.  This blog is about making a hatch cover from scratch.  I've included the sizes I used  for our hatches.  You can adapt your hatch cover easily based on these sizes and proportions.  Read more [...]